Description
Single component anticorrosion primer-enamel (DTM). No need to prime the surface.
Scope and specifics of application
ALURON AT paint-enamel is used to paint metal surfaces in the reduced drying mode, including assembly painting. Primer-enamel can be applied at subzero temperatures.
It is used for anti-corrosion protection and repair painting of internal and external surfaces of vehicles (agricultural machinery, construction equipment, public transport, railway transport), machine parts and mechanisms, construction metal structures surfaces, containers, hangars, roofs as well as other metal products exposed to increased mechanical and atmospheric effects. ALURON AT primer-enamel is used as repair coating as well as finishing products after assembly both indoor and outdoor. For these purposes, the material can be packaged into aerosol cans.
Information on the material resistance to various media is available on request.
Main fields of application: powerу engineering, mechanical engineering, railway transport facilities, transport construction.
Instruction for use
Metal surface should be abrasive blasted to grade 1 or 2 to GOST 9.402 (Sa 2,5 or Sa 2 to ISO 8501-1:2007). Clean surface must be free from dust and grease.
If the quality of surface preparation decreases, the service life and its operating performance may change..
Conditions
Relative air humidity no more 80%.
The process of applying
|
Preparation |
Ready to use. Stir thoroughly before use with mixer. Thin if needed with formula thinner RP-1K, RP-1K F. |
| Air spraying |
Operational viscosity: 25-60 s Thinning: 10-30% Nozzle diameter:1,8-2,5 mm Initial pressure: 3,0-4,0 atm |
|
Air-free spraying
|
Thinning: 0-10% Nozzle diameter: 0,011-0,017" Initial pressure: 120-160 atm |
| Cross linking at 200С |
15 min |
| The process of application from the aerosol can |
Shake the aerosol can thoroughly, remove the cap. Press the spray head and apply the primer-enamel to the surface prepared for painting with uniform movements. After painting, clean the spray valve, turn the cylinder over and press the spray head until the release of the remaining primer enamel stops.
|
|
Thinner |
Formula thinner RP-1K, RP-1K F. |
|
Cleaner |
Formula thinner RP-1K, RP-1K F, thinners of types Р4, Р5, methyl benzene, dimethyl benzene. |
|
Finishing |
Tubing, pistol and other spraying tools must be cleaned after using. |
|
Cleaning |
Wash the tools after using immediately. The frequency of washing depends on the amount of sprayed material, the temperature and the time since the shutdown, including any time lag. |