Description
One component fast-dry acryl primer on metal.
Scope and specifics of application
Aluron AT HQ primer is used as a primer layer in combination with alkyd, alkyd-urethane and other enamels.The material has a reduced drying time allowing to apply the finishing layer at any convenient moment. It is suitable for framing metal structures. As part of the complex coating, it is used for anticorrosive protection of vehicles internal and external surfaces: agricultural machinery, construction equipment, railway transport, public transport (buses, trams, etc.), as well as machine tools and mechanisms used in the power sector. ALURON primer-enamel is used as repair coating as well as finishing products after assembly both indoor and outdoor. For these purposes, the material can be packaged into aerosol cans.
Information on the resistance of the material to various media is available on request.
Main fields of application: power engineering, mechanical engineering, railway transport facilities.
Instruction for use
Metal surface should be abrasive blasted to grade 1 or 2 to GOST 9.402 (Sa 2,5 or Sa 2 to ISO 8501-1:2007). Clean surface must be free from dust and grease.
If the quality of surface preparation decreases, the service life and its operating performance may change..
Conditions
Relative air humidity no more 80%.
The process of applying
|
Preparation |
Ready to use. Stir thoroughly before use with mixer. Thin if needed with formula thinner RP-1K, RP-1K F. |
| Air spraying |
Operational viscosity: 18-40 s Thinning: up to 5% Nozzle diameter: 2,0-2,5 mm Initial pressure: 2-4 atm |
|
Air-free spraying |
Thinning: 0-20%
Nozzle diameter: 0,015-0,017"
Initial pressure: 120-160 atm
|
|
The process of application from the aerosol can.
|
Shake the aerosol can thoroughly, remove the cap. Press the spray head and apply the primer-enamel to the surface prepared for painting with uniform movements. After painting, clean the spray valve, turn the cylinder over and press the spray head until the release of the remaining primer enamel stops.
|
|
Thinner |
Water |
|
Cleaner |
Water |
|
Cleaning |
Clean the equipment after use according to the manual. |