General purpose thinner for «Polytex» products when hot drying.
FIELDS OF APPLICATION
It is used for thinning two-component polyurethane materials, mainly where hot drying is required. The thinner contains a high-boiling fraction to contribute to good filling, high gloss and high-quality paint film formation, even at elevated temperatures. This thinner helps to avoid such surface defects as shagreen, punctures and prevent solvent popping during coating formation.
More detailed information for thinning can be found in products technical specifications.
Store in a tightly closed container in a dry room, at a temperature from - 40 ° C to + 40 ° C away from sources of ignition, protecting from direct sunlight and moisture.
GUARANTED STORAGE LIFE
Expire date is 12 months in case if delivery and storing rules are followed. After expire date shouldn’t be used without tests.
HEALTH AND SAFETY
When painting work, use personal protective equipment (respirators, gloves, glasses, etc.). Work inside the room should be carried out with artificial (local, general) or natural ventilation. Use the thinner only in places without sources of open fire and ignition. Avoid contact with skin or eyes. In case of skin contact immediately wipe with a rag or cotton swab, rinse thoroughly with soapy water, do not use solvents. In case of eyes contact rinse with clean water for at least 10 minutes, consult a doctor. In case of ingestion, consult a doctor.
COMPOSITIONMixture of target thinners.