Description
Two-component epoxy compound «MasterPol -210 ЭП» consists of the base (component A) and hardener (Component B) to be mixed before painting.Fields of application
Two-component epoxy compound is used for industrial and civil floors: commercial and industrial premises, food and pharmaceutical enterprises, warehouses, aircraft hangars, car repair shops and garages as well as residential and utility rooms. It is used in the system with a primer "MasterPol -010".
The epoxy compound is designed for the construction of monolithic seamless polymer coatings – epoxy self-leveling floors with increased requirements for water and chemical resistance, mechanical strength and abrasion resistance. The coating is resistant to weathering and yellowing. The coating is laid on concrete, rigid metal and wooden structures. It forms a thick-layer coating resistant to mechanical and chemical loads.
Instruction for use
Check more detailed information in Technical Specification.Conditions
The room temperature should not be lower than +10°C and no more than +25 0C. Too low temperature slows down the rate of chemical reaction and makes spreading worse leading to increased material consumption and coating appearance deterioration. Too high temperature accelerates curing reaction and reduces the compound life. The relative humidity of the air in the room during the work is not more than 80%.
The process of applying
|
Preparation |
Component A (base) is mixed in a manufacturer's or special container, then component B (hardener) is added. Next, the components are thoroughly mixed for 2-3 minutes with a construction mixer. |
|
Proportions |
100:21,5 by weight 3:1 by volume |
|
Pot life at 20+20С, no less |
No less 30 min |
| Tools |
- two spindle construction mixer - notched spatula (spreading knife) - needle roller |
|
Cleaner |
Formula thinner RP-1K |
|
Cleaning |
Immediately after use |
| Pedestrian load | In 24 hours |
| Traffic load | In 3 days |
| Aggressive media exposure | In 5 days |