Description
Two-component epoxy compound «MasterPol -410 ЭП» for thin layer coating consists of the base (component A) and hardener (Component B) to be mixed before painting.
Fields of application
Two-component epoxy compound «MasterPol -410 ЭП» for thin coating is used for industrial and civil floors constructions: commercial and industrial premises, food and pharmaceutical enterprises, warehouses, aircraft hangars, car repair shops and garages as well as residential and utility rooms.
Instruction for use
Check more detailed information in Technical Specification.Conditions
The room temperature should not be lower than +10°C and no more than +25 0C. Too low temperature slows down the rate of chemical reaction and makes spreading worse leading to increased material consumption and coating appearance deterioration. Too high temperature accelerates curing reaction and reduces the compound life. The relative humidity of the air in the room during the work is not more than 80%.
The process of applying
| Preparation |
Component A (base) is mixed in a manufacturer's or special container, then component B (hardener) is added. Next, the components are thoroughly mixed for 2-3 minutes with a construction mixer. |
| Proportions |
100:21,5 by weight 3:1 by volume |
|
Pot life at 20+20С, no less |
No less 30 min |
| Tools |
- two spindle construction mixer - short bristles roller |
|
Cleaner |
Formula thinner RP-1K |
|
Cleaning |
Immediately after use |
| Pedestrian load |
Possible in 24 hours |
| Traffic load | In 3 days |
|
Aggressive media exposure |
In 5 days |